FACULTY PROFILE

Dr Anupam Choubey is an Assistant Professor in the Department of Mechanical Engineering at RGIPT, Jais. He holds a PhD in Mechanical Engineering from IIT Delhi and a B.Tech. in Mechanical Engineering from NIT Silchar, where he was a Gold Medalist. Before joining RGIPT, he worked as an Institute Postdoctoral Fellow at IISc Bengaluru.

His research interests include microfluidics, electrohydrodynamics, advanced manufacturing, additive manufacturing, and micro- and nanofabrication, with a focus on EHD printing and high-resolution fabrication technologies. His research has been published in reputed international journals and includes an Indian patent application. He has also received several research and travel awards for his contributions.

Education
Ph D  2025 Mechanical Engineering Indian Institute of Technology Delhi
B Tech 2015 Mechanical Engineering National Institute of Technology Silchar 
Experience
August 2026 - Till Date Assistant Professor, Department of Mechanical Engineering, Rajiv Gandhi Institute of Petroleum Technology, Jais campus, Amethi, UP, 229304
January 2026 - August 2026 Institute Post-Doctoral Fellow, Department of Mechanical Engineering, Indian Institute of Science Bengaluru, CV Raman Road, Bengaluru, Karnataka, 560022.
September 2017 - April 2018 Executive Officer (Retail Sales) Bharat Petroleum Corporation Limited
June 2015 - September 2017 Executive Officer (Retail Operations) Bharat Petroleum Corporation Limited

 

  • Internal Combustion Engine and Gas Turbine (ME 312)
  • Manufacturing Process-II (ME 313)
  • Micromachining (ME 320)
Research Interest
  • Fluid Mechanics
  • Microfluidics
  • Electrohydrodynamics
  • Microfabrication
  • Biomedical Devices
  • Additive Manufacturing
  • Heat Transfer
Journal Publications
  1. Choubey, A., Singh, A.K., and Bahga, S.S., 2026. Minimum flow rate of Taylor cone-jets of highly viscous liquids. Journal of Fluid Mechanics, 1032:A64
  2. Choubey, A. and Bahga, S.S., 2024. Electrohydrodynamic jet printed templates for hot embossing of microfluidic devices. Journal of Micromechanics and Microengineering, 34(10), p.105004
  3. Choubey, A., Dubey, K. and Bahga, S.S., 2023. Rapid prototyping of polydimethylsiloxane (PDMS) microchips using electrohydrodynamic jet printing: Application to electrokinetic assays. Electrophoresis, 44(7-8), pp.725-732
  4. Singh, A.K., Choubey, A., Srivastava, R.K. and Bahga, S.S., 2023. Physics of moderately stretched electrified jets in electrohydrodynamic jet printing. Physical Review E, 107(4), p.045103.
  5. Maji, A., Deshamukhya, T., Choubey, G. and Choubey, A., 2022. Performance evaluation of perforated pin fin heat sink using particle swarm optimization and MCDM techniques. Journal of Thermal Analysis and Calorimetry, 147(8), pp.5133-5150.
Patent Application
  • Bahga, S.S., Choubey, A., Dubey, K., Singh, A.K., Srivastav, R.K., “A method and a system for producing master mold for microfluidic devices”, Indian Patent Application, 202211056031, 2022. (FER response submitted on 4th June, 2026 and is under review, the patent application was published on 5th April, 2024)
Refereed and non–refereed conference proceedings and posters (†presenter)
  1. Choubey, A.†, and Bahga, S.S., “Regimes of steady jetting of highly viscous liquids in the electrohydrodynamic jet printing configuration”, Oral presentation, CompFlu 2025 (Annual International Meeting on Complex fluids and Soft matter), 13−17th December, 2025, IISC Bangalore, India.
  2. Singh, A.†, Choubey, A. and Bahga, S.S, “Effect of geometrical parameters on the onset potential in electrohydrodynamic jet printing”, Technical paper publication, In ASME International Mechanical Engineering Congress and Exposition India (IMECE India) 2025, 10–13th September, 2025, Hyderabad, India.
  3. Choubey, A.† and Bahga, S.S., “Electrohydrodynamic jet assisted rapid prototyping of non-sacrificial microfluidic templates: application to soft lithography and hot embossing”, Poster Presentation, INAE Annual Convention 2024, 19–21st December, 2024, hosted at Indian Institute of Technology Delhi.
  4. Choubey, A.†, Singh, A. and Bahga, S.S, “Minimum flow rate of Taylor cone-jets of highly viscous liquids”, Oral Presentation, APS DFD 2024 (77th Annual Meeting of the Division of Fluid Dynamics), 24–26th November, 2024, Salt Lake City, Utah, USA.
  5. Choubey, A.† and Bahga, S.S., “Electrohydrodynamic jet assisted rapid prototyping of non-sacrificial microfluidic templates: application to soft lithography and hot embossing”, Poster Presentation, μ−TAS 2023 (27th International Conference on Miniaturized Systems for Chemistry and Life Sciences), 15–19th October, 2023, Katowice, Poland.
Short–term Courses/Workshops attended
  1. Successfully completed the online faculty development programme (FIDP) on Coastal and Offshore Engineering conducted by AICTE Training and Learning Academy (ATAL) at IIT Guwahati during 14–18th September 2020.
  2. Attended the one-week short term online course on Mathematical Modeling of Complex Fluids under Technical Education Quality Improvement Programme conducted by Dr B.R. Ambedkar NIT Jalandhar during 24–28th September 2020.
  3. Attended the one week INSPIRE WINTER CAMP–2010 organized by Assam University Silchar, Assam during 5–11th January 2010.
Professional membership
  1. Life member of the National Society for Fluid Mechanics and Fluid Power (NSFMFP), India (since July 2026).
  2. Life member of the Indian Society for Heat and Mass Transfer (ISHMT), India (since June 2026).
  3. Life member of Indian Institute of Technology of Delhi Alumni Association.
  4. Life member of National Institute of Technology Silchar Alumni Association.
  5. Active member of the American Physical Society (APS), USA (since June 2024).
  6. Active member of the American Society of Mechanical Engineers (ASME), USA (since January 2025).
  • Awarded the “Institute Post-Doctoral Fellowship” by Department of Mechanical Engineering of Indian Institute of Science, Bengaluru.
  • Nominated for “International Travel Support” by Anusandhan National Research Foundation (ANRF), Govt. of India, for attending the 77th Annual Meeting of the Division of Fluid Dynamics (APS DFD 2024), USA.
  • Awarded “Research Excellence Travel Award” by Industrial Research and Development, IIT Delhi, for attending the 77th Annual Meeting of the Division of Fluid Dynamics (APS DFD 2024), USA.LINK
  • Awarded “Research Scholar Travel Award” by Indian Institute of Technology Delhi, for attending the 27th International Conference on Miniaturized Systems for Chemistry and Life Sciences (μ−TAS 2023), Katowice, Poland.
  • Awarded “Second Best Performing Executive Award” of Kolkata Territory (Retail SBU) of Bharat Petroleum Corporation Limited for FY 2017-18.
  • Awarded “Kalikrishna Mrinalini–Krori Gold medal” for best engineering graduate of the 2011–2015 batch of NIT Silchar.
  • Received “Certificate of Proficiency” from the Board of Secondary Education (SEBA) Assam, India for securing full marks (100%) in Advanced Mathematics in High School Leaving Certificate Examination, 2008.
  • “Appreciation Letters” awarded by Mr. Gautam Roy (Ex. MLA, Hailakandi, Assam and Ex. Vice President of BCCI) and by Lions Club, India for outstanding performance in 10th state board exams (SEBA, Assam)

Dr Anupam Choubey

Assistant Professor
Mechanical Engineering
;